Magikmold® T-124 Tin Cure Silicone Rubber

Duplicate the most intricate parts. Magikmold® T-124 Tin-Cured Silicone Rubber will reproduce the finest detail and is one of our top sellers! Magikmold® T-124 is a high strength, pourable, two-component room-temperature curing (RTV) silicone rubber. Low in viscosity and easy to pour, we recommend this for duplication of models high in detail and with many undercuts. Use the standard purple catalyst for about 60-90 minutes working time and a 12-18 hour demold time. For a faster cure, use the Medium-Fast Yellow Catalyst or Red Fast Catalyst for the fastest cure. Magikmold® T-124 is a pourable material; however, you can make it brushable with the thixotropic additive. FOR INDUSTRIAL/PROFESSIONAL USE ONLY.  Available with three different catalysts: COMES WITH STANDARD PURPLE CATALYST (Magikmold® T-124 Catalyst) | 60-90 MINUTE WORK LIFE | 12-18 HOUR DEMOLD ORDER MEDIUM-FAST YELLOW CATALYST (Magikmold® T-100 Medium Yellow Catalyst) TO SPEED IT UP TO 30-35 MINUTE WORK LIFE | 6-8 HOUR DEMOLD ORDER FAST RED CATALYST (Magikmold® T-100 Fast Red Catalyst) TO SPEED IT UP TO 15-30 MINUTE WORK LIFE | 4-5 HOUR DEMOLD   Specifications per Catalyst   Magikmold® T-124 Catalyst (Standard) Magikmold® T-100 Medium Yellow Catalyst Magikmold® T-100 Fast Red Catalyst Pot Life 60 – 90 min. 30 – 35 min. 15 – 30 min. Demold Time (@ 77°F) 12 – 18 hr. 6 – 8 hr. 4 – 5 hr. Cured Color Purple Yellow Pink Magikmold® T-124 Features Easy to use and will cure against sulphur clay Very good flowability and self de-airation Fast cure Excellent tear strength – High resistance to laceration Characteristic guarantees high resistance to wear and tear High elongation and stretchability (500% elongation) High level of accuracy in reproducing very small particulars Outstanding chemical resistance to attack by polyurethane resins. Mold life is significantly extended. You may need our thickener fluid.  Makes silicone paintable, so it doesn’t drip or run!   Physical Properties Type Tin-cured (condensation-cure) Mix Ratio by Weight 1 Part Catalyst : 10 Parts Base Shore Hardness A23 – A26 Mixed Viscosity 24,000 cP Specific Volume 25.4 in³/lb Specific Gravity 1.09 Tensile Strength 370 psi Elongation 514 % Die B Tear Strength 74 pli Die T Tear Strength 16.0 pli   All of the following are commonly cast into this silicone: Urethane (polyurethane) Plaster Soap Wax Polyester casting resin Hydrocal, Hydrostone Epoxy   Product Literature Technical Bulletin: Magikmold® T-100 Series Technical Bulletin Safety Data Sheet: Magikmold® T-124 Catalyst SDS | Magikmold® T-124 Base SDS