Wireless dual channel Microphone Model No. Ahuja AWM-490VHL Compact, lightweight, Dual Channel VHF Wireless Microphone System available in 5 different frequency groups. Combination of a hand-held dynamic microphone & a tie-clip condenser microphone for a wide variety of applications. Internal Antenna in the Microphone and two telescopic Antennas in the Receiver for clear and distortion free reception. Receiver operates on 9V DC through an AC Adaptor supplied along with the system. Each microphone operates with a 9V Dry Battery. Microphone with 3-position slide switch for ‘Audio On/Mute/Off’. Audio output from receiver available at OUT 1 & OUT 2 individually and as mixed output at OUT 1 2. Ideal for: PA Applications… Stage & Auditoriums… Seminar Halls… Places of Worship… Recreation Centres… Specification: HAND-HELD MICROPHONE RF Output Power 15mW (Max.) Modulation Mode FM (F3E) Microphone Element Dynamic, cardioid Dynamic Range 100dB Spurious Emission <45dB Maximum Deviation ±25kHz Frequency Response 50-15,000Hz Antenna Type Internal dipole Current Consumption <60mA Battery Life 6-8 hrs. with 9V battery Controls Mic On/Mute/Off Switch Indication Red LED for Mic ON Dimensions Ø52 × L242 mm TIE-CLIP MICROPHONE RF Output Power 10mW (Max.) Modulation Mode FM (F3E) Microphone Element Condenser, omnidirectional Dynamic Range 80dB Spurious Emission <45dB Maximum Deviation ±25kHz Frequency Response 80-12,000Hz Current Consumption <60mA Battery Life 6-8 hrs. with 9V battery Controls Mic On/Mute/Off Switch, Vol. Control Indication Green LED indicating power of cells Dimensions W65 × H32 × D107 mm Weight 0.11kg (w/o battery) RECEIVER Frequency Stability ± 0.005% Quartz Crystal Controlled Receiving Method Non-diversity Audio Output Channel 1: 0-55mV/1k, Channel 2: 0-55mV/1k Channel 1 2: 0-55mV/1k Signal To Noise Ratio > 100dB Distortion < 0.5% Frequency Response 50-15,000Hz Maximum Deviation ± 25kHz Antenna Telescopic Power Requirement AC: 220-240V 50/60hz for AC adaptor Controls Power On/Off switch, Audio Output Volume Control Indications  Red LED for Power ON Green LED for RF recepiton for Channel-1 Green LED for RF recepiton for Channel-2 Dimensions W210 × H42 × D152 mm Weight 0.70kg
